KINGREAL STEEL SLITTER is glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions. The following is the progress of KINGREAL STEEL SLITTER's various projects in 2025.
In 2025, KINGREAL STEEL SLITTER continued its global expansion, with multiple projects progressing smoothly. Through continuous technological innovation and excellent customer service, KINGREAL STEEL SLITTER continued to achieve new breakthroughs in the international market.
2025 Metal Slitting Machine Project
2025 Metal Cut to Length Line Project
2025 Steel Perforated Machine Project
A:KINGREAL believes that the digital development of slitting machine equipment is a very good direction
KINGREAL sincerely welcomes customers from all over the world to participate in our company's Canton Fair in April. Face-to-face communication, physically visit our factory, and answer your questions about machinery and equipment.
During the running of the tape barrier equipment, if the knife has a horizontal swing, it will cause uneven size. This is caused by the difference between the horizontal swing and the outer diameter of the tool.
The environmental requirements for the use of a sub -dealer: The machine should be installed in places where the temperature, dryness, ventilation, good light, and convenient operation should be installed.
In the case of the operation process, the staff must choose the appropriate roll core according to the width of the division, and choose the appropriate equipment and the appropriate equipment to the secret medicine for the sub -device.
The seminars are installed on the plane frame, the middle machine, and the rear frame is installed on the predetermined position, and the level calibration is firmly contacted with the foundation. At the same time, the racks cannot be offset, shaking and other phenomena, so as not to cause accidents.
