Metal slitting machine correct operation and use, thus reducing the abnormal wear and tear of the equipment; do a good job of routine maintenance, can make the equipment to maintain a good working condition, delay the deterioration process, thus ensuring safe operation.
1. The use of longitudinal coil slitting line environment:
In order to improve the service life of CNC equipment, the general requirements to avoid direct sunlight and other thermal radiation, not to mention in the humid, dusty or corrosive gases in the place.
Especially corrosive gases are prone to corrosion and deterioration of electronic components, resulting in poor contact or short circuit between components, affecting the normal operation of the equipment. Precision CNC equipment must have a good production environment, try to stay away from those vibration is relatively large machinery.
2. The power supply requirements
Power supply unit whether in the CNC equipment or other equipment is crucial. A stable power supply unit is a prerequisite for the stable operation of a device, so we generally want to add a voltage regulator on the power supply to reduce the fluctuations in the power supply voltage.
3. Operation specification
Operation standardization is to ensure the safe operation of the longitudinal steel coil slitting line is one of the important measures, the operator must operate according to the operating procedures. Machine tool failure, the operator to record the scene, a good photo to retain, and to the maintenance personnel to truthfully explain the situation before and after the failure, in order to facilitate the analysis and diagnosis of the cause of the failure, timely elimination.
In addition, the longitudinal steel slitting line should not be stored for a long time without using, after the purchase of the longitudinal shear machine to make full use of, especially into the use of the first year, so that it is prone to malfunction as soon as possible exposure of weak links, to be able to rule out in the warranty period.
In the absence of processing tasks, longitudinal steel coil slitter should also be regularly energized, it is good to be energized 1-2 times a week, each time the empty run for about 1 hour, in order to use the machine tool's own heat to reduce the humidity inside the machine, so that the electronic components do not get damp, but also in time to find out if there is a battery alarm occurs in order to prevent the loss of the system software, parameters.
If there are other questions about the use of slitting machine equipment, welcome to contact us.
