Following the continuous improvement of the norms of the technical level, many of the equipment are applied to the hydraulic system in the evening. In the process of mechanical operation, the hydraulic transmission system is also simple to present some problems, such as oil leakage, oil temperature change, particle pollution. In order to ensure that the steel coil slitting line equipment to play out the excellent mechanical operating efficiency, improve its service life, we need to adopt useful protection methods.
Especially on the steel slitting line this type of equipment, protect its hydraulic transmission system, will be useful to ensure that its operating conditions and quality of operation. So, do you know how to protect us? Below we share with us a little knowledge in this regard, I hope to help us.
First of all, we must ensure that the sealing effect of the tank is outstanding, and should also do a good job of dust-proof. Secondly, in the storage of hydraulic oil, not only pay attention to moisture and water, but also should pay attention to avoid dust into the oil to avoid causing metamorphosis. Third, the hydraulic transmission system of the split machine equipment must be equipped with filtration equipment, which can be timely eradication of pollution particles to ensure that it can operate stably; fourth, should check to see the system of pumps, valves, cylinders and other components of the cooperation gap, too large to overhaul the adjustment to avoid leakage of the system to clean the pump inhalation of the coarse filter.
In addition to the points described above, we should also give the hydraulic drive system of the slitting and cut to length line to set the protective cover, or blowing dust-proof equipment. In addition, in order to ensure that the system can operate normally under the conditions of the conditions, the oil pump pressure should be adjusted to the low operating pressure, in order to reduce energy consumption, to avoid the oil temperature is too high.
As a user of the equipment, we must pay attention to this aspect of the operation, and actively do a good job of high speed slitting line and other mechanical equipment, hydraulic system protection. I believe that doing a good job of these, will be able to play a great effect for the improvement of operational efficiency.
