When it comes to the maintenance work of the slitting machine, it is actually the maintenance work for each part of the equipment.
First of all, we should pay attention to the discharge frame (decoiler and rewind machine) on the sliding bearing appearance grease and move around( once every three days); on the longitudinal shear equipment on the discharge shaft pressure plate at the sliding bearing appearance grease tail with grease gun refill (once a week, before refueling clean refueling place).
The brake coupling place should also pat attention to ass lubricant and move back and forth several times (three times a week, pay attention to clean).
On the longitudinal shear equipment on each adjusting roller, adjusting parts filled with lubricant (three times a week, pay attention to clean); the upper and lower knife adjustment place(worm gear worm) filled with grease (three times a week, pay attention to clean); the lower knife shaft clutch place should also pay attention to fill with lubricant(three times a week, pay attention to clean).
Longitudinal shear equipment on the waste edge machine maintenance, this support shaft should be filled with grease, and move around several times(three times a week, pay attention to clean); toothless screw group on the slitter blade we need to pay attention to, fill with grease and move around several times (three time a week, pay attention to clean).
Longitudinal shear at each cylinder seal volume to clean and clean, fill with lubricant( three times a week, pay attention to clean).
After the actual production of the steel slitting machine, attention should be paid to cleaning up the environment, and after that, attention should also be paid to check the equipment, all the fasteners for test to prevent loosening, to ensure the smooth operation of the next production. After that, on the longitudinal shearing machine equipment to adjust the rising force mechanism device and maintenance, it to pay attention to see if the pressure is appropriate. Also according to the machine weight to select the lifting equipment specifications will be lifted to the appropriate location for each device to be fixed.
