This year, KINGREAL STEEL SLITTER successfully shipped an aluminum coil slitting machine to Russia, and the cooperation with local customers has been deepened again. This article will give you a detailed introduction to the entire delivery process of KINGREAL STEEL SLITTER aluminum coil slitting line, ensuring that you have a clearer understanding of the production and transportation of the aluminum coil slitting machine.
Before delivery, the aluminum coil slitting machine will undergo a rigorous testing process to ensure that the performance and quality of the aluminum coil slitting line meet the production requirements of Russian customers. First of all, each component of the aluminum coil slitting machine needs to be fully inspected to ensure that its surface condition is good and that the components can be smoothly assembled into a complete production line. In this process, special attention is paid to the following aspects:
⚪ Production speed test: The aluminum coil slitting line must reach the maximum production speed of 230m/min agreed with Russian customers.
⚪ Slitting capacity test: Confirm that the aluminum coil slitting machine can cut out 40 narrow strips at the same time, and the quality of each strip meets the standard.
⚪ Cutting accuracy: The narrow strips cut out must be burr-free and maintain consistency in width to ensure high accuracy.
Only after all the above indicators are met, the aluminum coil slitting line will be evaluated as a qualified aluminum coil slitting machine, and after obtaining the permission of Russian customers, the shipment will be confirmed.
Parameters of Aluminum Coil Slitting Line
Parameter
Specification
Material Specifications
Material type
Mainly aluminum coils of various alloys (such as AA1050, AA3003, AA5052)
Material thickness
Usually between 0.1 mm and 4.0 mm
Roll width
Usually between 100 mm and 2000 mm
Slitting parameters
Number of slitting blades
Specifies how many blades are used for cutting at the same time
Minimum Strip Width
The smallest strip width that can be produced, typically 10 mm or less
Width Tolerance
The accuracy with which the strip width is maintained uniformly along the length of the roll, typically between ±0.1 mm and ±0.5 mm
Line Speed and Capacity
Line Speed
Operating speeds up to 230 m/min
Maximum Roll Weight
The maximum roll weight that can be handled, typically up to 20 tons
Maximum Roll Outer Diameter
The maximum roll diameter that can be handled, typically up to 2000 mm
Feeding and Unwinding Systems
Roller Equipment
used to load and unload rolls onto the slitting line
Decoiler
used to unwind the roll, typically with hydraulic or electric options
Circulation Control System
that maintains proper tension and material flow during operation
Slitting and Rewinding Systems
Slitting Head
Equipped with precision slitting knives or rotating shears for clean, accurate cutting
Separator Mechanism
used to separate and guide the individual strips after slitting
Recoiler
Used to roll the slit strips back into a roll of specified size to maintain a tight tolerance
On the day the aluminum coil slitting line was shipped, KINGREAL STEEL SLITTER staff carefully packaged the various components of the aluminum coil slitting machine in the workshop. Including but not limited to the following important components:
√Decoiler
√Tension Station
√Front Loop
√Back Loop
√Waste Collection
√Main Coil Slitter
During the packaging process, KINGREAL STEEL SLITTER staff also sorted out the accessories of the aluminum coil slitting line, such as blades, hydraulic nuts, gaskets, and spacers, and put them into special boxes. In order to ensure safety during transportation, KINGREAL STEEL SLITTER staff used cranes and forklifts to put the packaged aluminum coil slitting machine parts one by one on the truck, and a dedicated person bundled them to prevent collisions between parts.
 |
 |
 |
After loading is completed, KINGREAL STEEL SLITTER staff will take a final inventory with a list to confirm that all parts and accessories of the aluminum coil slitting machine have been properly packed. After the inventory is completed, KINGREAL STEEL SLITTER staff will also take photos for record for subsequent inspection. After confirming the loading situation with the driver, the delivery of the aluminum coil slitting line is officially started and the vehicle drives to the dock.
This aluminum coil slitting machine will be shipped to the factory of the Russian customer by ship. During the transportation process, KINGREAL STEEL SLITTER ensures that all transportation links meet the standards to prevent any problems in long-distance transportation. While the aluminum coil slitting line is sailing at sea, KINGREAL STEEL SLITTER staff will continue to pay attention to the transportation status to ensure that the aluminum coil slitting machine can arrive safely at the destination.
