Before starting the machine, inject different lubricants into each part that needs to be filled with lubricants according to the lubrication requirements. First check whether each electrical switch is in 0 position, then turn on the power.
Check whether each mechanical part and pneumatic system is normal, if there is any abnormality, it should be checked and excluded in time, and check whether the transmission file position is correct or not, otherwise it will produce quality problems, so as not to cause accidents of mechanical equipment.
Whether the pressure gauge of the cutting machine reaches 0.5-0.7mpa, every morning at work first let the motor run empty for 2-3 minutes, transmission gear to 0, otherwise it can not cut.
It is strictly prohibited to wear gloves to start the machine, long-sleeved clothes must wear hand sleeves, long hair must wear a hat, the operator is not allowed to leave the machine tool when driving, not allowed to do other unrelated things, pay attention to whether the welding mouth is normal.
Rotating parts of the boot shall not be wiped, the correct adjustment of the mold, can not vigorously downward pressure, in place on the line.
Operation if you find a variety of abnormal phenomena, such as smoke, burnt flavor, fuse suddenly burned out, indicator light suddenly off in time to turn off the power switch to be checked, troubleshooting and then start the operation.
