1. Pressure sensor film slitter press screen machine equipment, such as various cylinders and vacuum generators, is dependent on air pressure to function. If this pressure is not met, the machine will not function as intended. The pressure sensor continuously monitors changes in pressure and, if abnormal, will promptly alert the operator to take appropriate action.
2. Position sensor press screen machine printed board transfer positioning has strict requirements on the position; these positions need to be realized through various forms of position sensor. Examples of these positions include PCB counting, laminating head and table movement of real-time detection, the movement of auxiliary agencies, etc.
3. The pressure screen machine makes extensive use of the laser sensor film slitter laser, which is useful for figuring out the coplanarity of the device pin. When the test device reaches the laser sensor monitoring position, the laser beam is emitted by the IC pins and reflected back to the laser reader.
If the beam length reflects the same launch beam, the device is considered coplanar; if not, pin warping causes the reflected light beam to become longer, indicating that the laser sensor has defects.
4. A negative pressure generator, also known as a jet vacuum generator, and vacuum sensors make up the negative pressure sensor film slitter screen press machine suction nozzle. These components are absorbed by negative pressure. The machine's ability to operate normally will be impacted by a number of factors, including insufficient negative pressure, the inability of the suction nozzle to suction components, the feeder's lack of components, or components that are trapped in the package and cannot be sucked up. The negative pressure sensor continuously tracks any changes in negative pressure.
If it detects a lack of suction or an inability to suction the components, it can sound an early warning to the operator, reminding them to replace the feeder or check if the nozzle negative pressure system is blocked.
