1. Pay attention to the clothing before using the slitter blades. When we use them for work, we must pay attention to what we wear. Because they are blades, they have a very strong sharpness effect, so in terms of clothing, it is best to avoid open clothes, or flat clothes, wear tight-fitting clothes, tight cuffs, is the best point of protection to avoid clothes being cut open and to avoid injury to themselves.
Thus, before we use them, we must make sure that their clothes are well regulated.
2. In the use of slitting machine blade process to pay attention to the professional situation. Slitting blade if a single take out, do not pay attention to the sharpness of the blade situation will occur unnecessary damage, so we must have professional skills in the use of them, the action is fast, clean, sharp, can effectively speed up the work process, but also will give us a guarantee of safety with ourselves.
If non-professionals, we have to pay attention to the use of the situation, it is best to reduce their workload.
3. Pay attention to the maintenance situation after using the slitter blades.
In the slitting machine blade, slitting machine blade, plastic crusher blade, cutting machine roller blade and other factors caused by the heat generated during the cutting of the tool such as the current, is through the machine, tool and work-piece to form a closed-loop system of machine tools.
At the same time, there are local thermal currents in the limited contact area of the work-piece and the tool, which leads to tool wear. Therefore, improving its cutting performance and increase its cutting performance and increasing tool durability can eliminate and enhance the effect of cutting thermal currents on tool wear, thermal cycling, there is another way: cutting performance and durability during the cutting process is getting more and more attention.
